GigE MotionBLITZ EoSens mini1 - Page 16

DeviceScanType
This feature specifies the scan type of the sensor.
Access Read only
Interface IEnumeration
Unit --
Range Area Scan
Invalidation --
Precondition --
Note --
DeviceReset
When supported by the camera, this command resets the camera's circuitry.
Access Write only
Interface ICommand
Unit --
Range --
Invalidation --
Precondition --
Note After a DeviceReset the camera has to be recon-
nected before using it again.
Feature description
MikrotronGmbH / mini1 / CAMMC1370/71-RG / 2021 16 - 67