GigE MotionBLITZ EoSens mini1 - Controls

points within one frame time to reset over exposed pixels to a predefined
value.
Name Type Access
MultipleSlopeMode Enum R/W
MultipleSlopeDualRaw Integer R/W
MultipleSlopeTripleRaw Integer R/W
3.14.2 Controls
MultipleSlopeMode
This feature defines the Multiple Slope Mode. The multiple slope mode is used
to extend the dynamic range of the camera.
Access Read / write
Interface IEnumeration
Unit --
Range NormalShutter, DualSlope
Invalidation MultipleSlopeDualRaw
Precondition CameraState = Idle or Live
Note n NormalShutter – disable slops
n DualSlope – dual slope enable
MultipleSlopeDualRaw
This feature sets the value for Dual Multiple Slope in percent of the exposure
time.
Access Read / write
Interface IInteger
Unit --
Range 1…99
Invalidation 
Precondition CameraState = Idle or Live
MultipleSlopeMode = DualSlope
Feature description
MikrotronGmbH / mini1 / CAMMC1370/71-RG / 2021 54 - 67