1.1 About this manual
This manual contains helpful information to install and operate the here
described camera. It has been produced with care. Nevertheless, information
might be erroneous or incomplete. Mikrotron GmbH cannot be held respons-
ible for any problems resulting from incomplete or erroneous information.
In case you detect errors or need further information, please inform us via
mail:
service@mikrotron.de or
Call +49- 89-7263-4200
We highly recommend to read this manual carefully.
NOTE This manual is subject to change without notice.
1.1.1 Tips, remarks, and notes
This manual contains tips and notes that help to avoid data loss or camera
damage. They are emphasized as follows:
INFO Provides information that may help to improve camera handling or avoid data
loss.
NOTE Provides information to avoid damage to the system.
1.1.2 Registered trademarks
In this manual the following registered trademarks may be used:
n MotionBLITZ®
n ImageBLITZ®
n EoSens®
n GenICam®
n Microsoft® and Windows®
n Intel®
Throughout the manual, these trademarks are not specifically marked as
registered trademarks. This in no way implies that these trademarks can be
used in another context without the trademark sign.
1.1.3 Conformity and use
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These require-
Before you start
MikrotronGmbH / mini1 / CAMMC1370/71-RG / 2021 5 - 67
To Next Page
Loading...