GigE MotionBLITZ EoSens mini1 - 1.2 Warranty and non-warranty clause

Pour les utilisateurs au Canada
Cet appareil est conforme aux normes Classe A pour bruits radioélectriques,
spécifiées dans le Règlement sur le brouillage radioélectrique.
Life support applications
The products described in this manual are not designed for use in life support
appliances or devices and systems where malfunction of these products can
reasonably be expected to result in personal injury.
NOTE Mikrotron customers using or selling these products for use in such applic-
ations do so at their own risk and agree to fully indemnify Mikrotron for any
damages resulting from such improper use or sale.
1.2 Warranty and non-warranty clause
Warranty is described in §8 of our General Terms and Conditions which can be
downloaded on the Mikrotron web page (www.mikrotron.de/en/terms.html).
In addition, take the following non-warranty clauses into account.
NOTE The camera does not contain serviceable parts. Do not open the body of the
camera. If the camera has been opened, the warranty will be void.
NOTE The camera has to be used with a supply voltage according to the camera’s
specification. Connecting a lower or higher supply voltage, AC voltage,
reversal polarity or using wrong pins of the power connector may damage
the camera. Doing so will void warranty.
Our warranty does not protect against accidental damage, loss, or acts of
nature.
INFO Mikrotron cannot be held responsible for the loss of data. We recommend a
backup plan.
Before you start
MikrotronGmbH / mini1 / CAMMC1370/71-RG / 2021 7 - 67