GigE MotionBLITZ EoSens mini1 - Page 30

UserSetLoad
This feature loads the User Set specified by UserSetSelector to the device and
makes it active. The User Set includes the features Width, Height, OffsetX, Off-
setY.
Access Write
Interface ICommand
Unit --
Range --
Invalidation --
Precondition --
UserSetSave
This feature saves the current frame settings to the User Set specified by User-
SetSelector. The data gets saved in the non-volatile memory of the camera.
The User Set includes the features Width, Height, OffsetX, OffsetY.
Access Writer
Interface ICommand
Unit --
Range --
Invalidation --
Precondition --
Note The default feature can be not saved.
By the first time of the saving of UserSet1, make sure
that the UserSetDefaultSelector is default. After the
saving, the UserSetDefaultSelector can be set to User-
Set1.
UserSetDefaultSelector
This feature defines the User Set to Load when the camera gets reset. The
User Set includes the features Width, Height, OffsetX, OffsetY.
Access Read / write
Interface IEnumeration
Unit --
Range Default, UserSet1
Invalidation --
Precondition --
Feature description
MikrotronGmbH / mini1 / CAMMC1370/71-RG / 2021 30 - 67