StreamSequenceSelector
This feature selects the current sequence for streaming. If streaming from the
camera to the host is selected, this feature defines the index of the sequence
the frames are read from.
Access Read / write
Interface IInteger
Unit --
Range 0 ... 15, increment 1
Invalidation n RecordNumberOfFramesPerSequence
n StreamStartNumber
n StreamEndNumber
Precondition CameraState = Idle or Live
Note This features are indexed by the value of
StreamSequenceSelector:
n RecordNumberOfFramesPerSequence
n StreamStartNumber
n StreamEndNumber
n StreamSequenceStart
n StreamSingleFrame
For example, to get the number of recorded frames in a
sequence the StreamSequenceSelector has to be set to
its index. After setting the sequence number, the number
of frames can be read from feature RecordNum-
berOfFramesPerSequence.
StreamStartNumber
This feature defines the number of the start frame for reading frames from an
image buffer. The index of the referenced streaming buffer must be selected
by the feature StreamSequenceSelector before setting this parameter. The
frame number is relative to each buffer and starts with 0.
Access Read / write
Interface IInteger
Unit number of pictures
Range 0 ... StreamEndNumber
Invalidation --
Precondition CameraState = Idle or Live,
Feature description
MikrotronGmbH / mini1 / CAMMC1370/71-RG / 2021 44 - 67
To Next Page
Loading...