Aesthetic inspection
Appearance checks:
- Paintwork
- Fitting of plastics
- Scratches
- Dirt
Tightening torques inspection
Fastenings check
- All tightening torques
- External fairing screws
Electrical system
Electrical system
- Fill the battery with battery acid, charge it with a suitable charger.
- Key switch
- Low beam lights, high beam lights, warning lights, parking lights
- Headlight adjustment
- Rear light
- Stop light (possibly front and rear brake)
- Turn indicators and relevant warning lights
- Lighting up speedometer and instruments
- Horn
- Starter button
CAUTION
TO ENSURE MAXIMUM PERFORMANCE, THE BATTERY MUST BE CHARGED BEFORE USE.
INADEQUATE CHARGING OF THE BATTERY WITH A LOW LEVEL OF ELECTROLYTE BEFORE
IT IS FIRST USED SHORTENS THE LIFE OF THE BATTERY.
WARNING
BEFORE RECHARGING THE BATTERY, REMOVE THE CAPS OF EACH CELL.
KEEP OPEN FLAMES OR SPARKS AWAY FROM THE BATTERY DURING CHARGING.
REMOVE THE BATTERY FROM THE SCOOTER, DISCONNECTING THE NEGATIVE TERMINAL
FIRST.
CAUTION
WHEN INSTALLING THE BATTERY, ATTACH THE POSITIVE LEAD FIRST AND THEN THE NEG-
ATIVE LEAD.
WARNING
BATTERY ELECTROLYTE IS TOXIC AND IT MAY CAUSE SERIOUS BURNS. IT CONTAINS SUL-
PHURIC ACID. AVOID CONTACT WITH EYES, SKIN AND CLOTHING.
IN CASE OF CONTACT WITH EYES OR SKIN, RINSE WITH ABUNDANT WATER FOR ABOUT 15
MINUTES AND SEEK MEDICAL ATTENTION AT ONCE.
Pre-delivery Runner Purejet
PRE DE - 2
To Next Page