Spark plug
We inform you that, in order to avoid water infiltra-
tions through the spark plug cap, the following
modifications have been introduced:
1. The following parts have been discontinued:
a) Spark plug cap
b) Spark plug protective collar
2. A new spark plug cap has been introduced
- Disconnect the lug of the spark plug and remove
it.
- Examine it carefully and if the insulation coating
is splintered or damaged, replace it.
- Measure the distance between the electrodes
using a feeler gauge and if necessary regulate it
by carefully bending the external electrode.
- Ensure the seal washer is in good condition.
- Fit the spark plug, screw it on by hand and secure
it with a spark plug spanner to the prescribed tor-
que.
Characteristic
Electrode gap
0.6 ÷ 0.7 mm
Recommended spark plug
RG 6 YCA
Locking torques (N*m)
Spark plug: 11 ÷ 14 Nm
Hub oil
Runner Purejet Maintenance
MAIN - 5
To Next Page
Loading...
