- Impregnate with fuel mixture of 50% fuel and oil.
CAUTION
NEVER RUN THE ENGINE WITHOUT THE AIR FILTER, THIS WOULD RESULT IN AN EXCESSIVE
WEAR OF THE PISTON AND CYLINDER.
Recommended products
AGIP CITY HI TEC 4T Oil for air filter sponge
Synthetic oil that passes SAE 5W-40, API SL, ACEA A3, JASO MA specifications
Fuel filter
To access the fuel filter remove the
•
left side.
•
Remove the filter from its support
•
Disconnect the tube from the fuel tank
taking care to arrange a bowl to collect
the fuel present in the tank. Please
note the tank is not fitted with a tap.
See also
Side fairings
transmissions
After mounting the transmissions, check that they
move perfectly within the sheath.
- Lubricate the cable with the recommended prod-
uct, applying a plastic bag as shown in the picture.
- If the cable does not move perfectly due to pos-
sible fraying replace both the cable and the sheath.
Recommended products
AGIP CITY HI TEC 4T Oil for flexible transmis-
sion lubrication (acceleration control, mixer
and odometer)
Synthetic oil that passes SAE 5W-40, API SL,
ACEA A3, JASO MA specifications
Runner Purejet Maintenance
MAIN - 7
To Next Page
Loading...
