Possible Cause Operation
Turn indicators not working Check the turn indicator device and wiring.
Steering and suspensions
Heavy steering
STEERING HARDENING
Possible Cause Operation
Steering hardening Check the tightness of the upper ring-nut. If irreg-
ularities continue to appear in rotating the steering
even after making the adjustments, check the
housings where the ball bearings rotate: replace if
not fitted.
Excessive steering play
EXCESSIVE STEERING PLAY
Possible Cause Operation
Excessive steering backlash Check the tightening of the top ring nut. If irregu-
larities continue in turning the steering even after
making the above adjustments, check the seats in
which the ball bearings rotate: replace if they are
recessed.
Noisy suspension
NOISY SUSPENSION
Possible Cause Operation
Noisy suspension If the front suspension is noisy, check: the efficien-
cy of the front suspension, the condition of the ball
bearings and relevant lock-nuts, the limit switch
rubber stoppers and the movement sleeves.
Suspension oil leakage
SUSPENSION GREASE LEAKS
Possible Cause Operation
Suspension grease leaks Replace the sealing rings.
OIL LEAKAGE FROM SUSPENSION
Possible Cause Operation
Oil leakage from suspension Replace the damper.
Troubleshooting Runner Purejet
TROUBL - 4
To Next Page
Loading...
