- Remove the dust guard ring using a screwdriver
as shown in the figure.
N.B.
BE CAREFUL NOT TO DAMAGE THE DUST GUARD AND
THE STEM.
- Remove the oil guard safety lock using a screw-
driver.
- Repeatedly actuate the stem to remove it from
the fork leg.
- Extract the oil guard "D", the abutment washer
"C" and the top bushing "B".
- Widen and remove the bottom bushing "A".
Refitting
Refitting stems on fork legs
Preassemble the stem as indicated:
- Install the bushing from the bottom of the stem
Suspensions Nexus 500 euro 3
SUSP - 296
To Next Page
Loading...
