In order to access the connector, remove the wind-
shield with the respective support and the metal
plate holding the control unit ECU, decoder and
saddle opener remote control.
N.B.
AFTER INSERTING THE INTERFACE CABLE OR THE
ELECTRONIC CONTROL UNIT, RETIGHTEN THE SCREW
AND THE GROUND CABLE.
Immobiliser decoder
In order to access the immobilizer decoder, re-
move the upper shield back plate.
Relays and diode group
In order to access the relays and the diode group,
remove the upper shield back plate.
Voltage regulator
In order to access the voltage regulator, remove
the lower cover.
Electrical system Nexus 500 euro 3
ELE SYS - 48
To Next Page
Loading...
