3
Introduction Model: GHM Warmer Series
INCHES [mm]
Pan Depth 2-1/2 [63.5] to 4 [101.6]
1.04.2 Basic Steam Table Pan Layouts
The diagrams below show examples of typical Pan layouts. The GILES Warmer can accommodate pan depths from 2-
1/2” [64 mm] to 4” [102 mm]. Units are shipped with enough Pan Support Dividers for the layout Configuration #2
shown below. Actual layout possibilities are practically limitless with purchase of additional Dividers.
PANS ARE NOT INCLUDED
.
To Next Page