Gill WindObserver 65 - Page 62

62
gillinstruments.com
Issue: 8 (Applies to firmware 2387 6.09 onwards)
Document number: 1390-PS-0039
Ultrasonic Anemometer
Select File/Connect.
The default connection name is Anemometer 1, it can be re-named if required.
Select the Output Format to match the Sensor format i.e. the WindObserver default format is Gill Polar (2 axis).
If the WindObserver were set for UV or NMEA output then choose the appropriate format setting from the drop down
menu.