6.3 MENU CONFIGURATION
Once the PIN has been introduced, the user is in the mode of restricted programming, move up to
ConFIG
. By using this function the user can
program the following NO METROLOGICAL parameters:
FiLtEr
filters
FEchA
date
dAtE
hour
Mv
mV of the cell
ICoUnt
Internal accounts
LAnG
Languange
CH.PASS
Password change
AUtArb
Auto-Lock Tara
StAnbY
autostanby (only for LED version)
blIGht
Backlight è (only for LCD version)
PrInt
Print settings
CodES
Name of the item1, item2 and tcode
PoWEr
Selecting the internal battery type
rEPEAt
Retransmission of plot in repeater mode
tCHECt
(Visible only in open calibration)
dECIMA
(Visible only in open calibration)
FILTER: Media weighting filter. Being 1 the most robust 6 the most sensitive.
DATE: Select the date in the format DD.MM.AA. Being DD the day, MM the month and AA the year.
TIME: Select the time using the format hh.mm.ss. Being hh the time in format 24h, mm the minutes and ss the seconds.
AUTOSTANBY: Autostandby time selection. If toFF is set to 00, the Autostandby is disabled. The value entered is the time without weight
variation or keystroke that takes to enter standby. It only works when the power comes from the optional battery.
MILIVOLTS: mV: It shows the milivolts of the load cell.
I.COUNT : Displays the A/D converter data, press to exit.
LANGUAGE: Using this menu the user can choose the language in which the tickets are going to be printed and which appears on the display.
The languages that are available are: Spanish, French, English, French and Italian.
PASSWORD CHANGE: It changes the entrance password to the technical menu, the user must introduce first the current password and then
the new one. The password by default is 0000.
AUTARB: Using this menu the user can choose if s/he wants to block the tare automatically.
BACKBLIGHT: allows to select backlight working mode whithin Auto, ON, OFF (only for LCD devices).
PRINT: Select the type of printer, the auto cutter, the number of line advances at the end of the ticket and the number of copies of the ticket.
CODES: It allows to edit the name of the item1, item2 and tcode.
POWER: Selection of type of power supply, network, optional battery (3, 7V), optional lithium battery (7.4), this parameter activates the charge
indication according to the type of battery.
REPEAT: In this menu you can choose whether to re-send or not, the received frame, in the case of using the viewer a repeater of another.
TCHECK: (Under development)
DECIMA: Allows us to select the decimal separator as comma or point.
To Next Page
Loading...
