Global BEAT-Tr - Entering Auxiliary Data

USER MANUAL
Range BEAT-Tr
Edition: January 2016
Revision: No. 3
MODE OF USE - 21
3.1.8 Entering Auxiliary Data: Only If Enabled (SETUP/AUXILIARY DATA = 1).
Ñ
Entering Auxiliary data using the
barcode (Code 128 up to 16 charac-
ters).
AUXILIARY DATA: Start screen.
AUXILIARY DATA:
XXXXXXXXXXXXXXXX
Capture by scan-
ner.
To delete the reading and move to the start
screen, press <STOP>.
If the barcode or reading were incorrect:
AUXILIARY DATA:
WRONG DATA
Error message.
Two acoustic signals are emitted and it returns
to the start.
L Entering Auxiliary Data without
barcode: via the keyboard.
Click one of the 4 arrows. The display will show
the following screen:
AUXILIARY DATA:
$---------------
Blinking cur-
sor.
Manually enter using the arrow buttons.16
alphanumeric characters.
Press the ¨ and § arrows to move the cursor
to a different field and the © and ª arrows to
select the values.
To delete the reading and pass to the start
screen press <STOP>.
Press the START/VALIDATE key to pass to the next screen, regardless of whether or not
the auxiliary data were entered.