Global BEAT-Tr - Unit Identification; Serial Number Stamping; CE Making

USER MANUAL
Range BEAT-Tr
Edition: January 2016
Revision: No. 3 INTRODUCTION - 7
1.4 UNIT IDENTIFICATION
1.4.1 Serial Number Stamping:
The electrofusion units BEAT-Tr and MINI BEAT-Tr are identified by means of their own
identification plate.
QUALITY CONTROL
ACUSTER GLOBAL
CONTROL DE CALIDAD
MACHINE No. EQUIPO Nº
MAINTENANCE
REVISIONS
" REVISIONES "
MANUFACTURER'S
ADDRESS
Juan de la Cierva, 1 - Políg. Ind. del Sud-oest
Telf. +34 93 4703070 - Sant Just Desvern (Barcelona)
Figure 1
The quality control identification plate includes the fusion control box serial number. The
plate includes room for future maintenance date stamping.
1.4.2 "CE" marking:
The electrofusion unit is supplied with the appropriate plate with the "CE" mark, as the
European Community norm indicates on the new Machine Security Regulation (Board
98/37/CE, dated 22nd June 1998).
ACUSTER GLOBAL
C E
" MODELO: "
Nº SERIE
Juan de la Cierva, 1 - Políg. Ind. del Sud-oest
Telf.+34 93 4703070 - Sant Just Desvern (Barcelona)- SPAIN
Figure 2