Globaljig KOALA - Checking the Efficiency of the Safety Catch; Breakdowns or Malfunctions; Special Maintenance

GLOBALJIG INTERNATIONAL S.r.l.
26
7.3.2. Checking the efficiency of the safety catch
- Visually verify the absence of tools and/or dirt within the notches (2, fig. 7.1) for the catch device (1, fig.
7.1).
- Test the efficiency of the catch device’s disengagement control piston, verifying its correct
activation/deactivation using the “deactivate safety” button (see fig. 5.1).
- Check that the safety catch device rotates freely on its pin.
- Repeat the operation a few times.
7.4. Breakdowns or malfunctions
The KOALA LP is designed and manufactured using components and materials with controlled technical
characteristics. For this reason, breakdowns or malfunctions do not occur frequently and the types of
interventions allow for extremely limited periods of downtime for the customer.
Any unforeseen anomalies that may arise while the system is in function can be resolved by consulting the
GLOBALJIG Customer Assistance Service.
7.5. Special Maintenance
Special, or unscheduled, maintenance operations may require the replacement of certain components of the
LP, with reference to the list provided in chapter 8. If you should encounter difficulty in replacing and/or
obtaining a component, please contact the GLOBALJIG Assistance Service.
! ! ATTENTION! !
The use of a non-original or non-specific spare parts can alter the machine’s original
configuration and give rise to potential hazards not directly related to the LP.
In such cases, GLOBALJIG shall bear no responsibility for any resulting
personal injury, property damage or damage to the system itself.
Special maintenance interventions must only be performed by personnel in possession of Qualification 1.
Fig. 7.1