GLOBALJIG INTERNATIONAL S.r.l.
4
1 USE AND STORAGE OF THE INSTALLATION, USE AND MAINTENANCE MANUAL
Note: Within this document, the term LP is used to refer to the KOALA car lifting platform.
1.1 Purposes and intended users of the Installation, Use and Maintenance manual
The Installation, Use and Maintenance Manual provides the necessary indications for the correct use of the
KOALA LP and describes its physical and functional characteristics.
The manual must remain with the LP for its entire life cycle. For this reason, in the event of resale to any
third party, the manual must accompany the machine in order to ensure the safety of the operator and the
user.
The manual allows for the performance of the following operations:
INSTALLATION
USE
MAINTENANCE
DISPOSAL
It is intended for use by both the user, as well as by the operators in charge of the operations above.
Where required, the necessary qualifications are provided in section 1.2.
The company GLOBALJIG INTERNATIONAL shall bear no responsibility for any personal injury or
property damage resulting from the non-observance of the requirements contained within this manual.
The company GLOBALJIG INTERNATIONAL shall also bear no responsibility for any risks which may
arise in relation to any of the following situations:
improper use of the LP;
use which does not comply with the specific national standard;
installation which does not comply with the indications contained within this document;
lack of required maintenance;
unauthorised modifications or interventions;
use of non-original or non-specific spare parts;
non-observance of the instructions contained within this document.
The manual can no longer constitute a reference in the event that the user should intend to perform any
modifications which will alter the configuration of the LP. In such cases, the manufacturer shall only bear
responsibility in relation to any eventual manufacturing defects.
1.2 Definitions and terminology
User
Operator
LP lifting platform
The term “User” refers to any individual whose responsibilities involve the continuous use of the LP.
The term “Operators” refers to the individuals in charge of installing, operating, adjusting, servicing,
cleaning and repairing the LP.