German Light Products®
Rev. 20220720-01 17
iQ.Gamut
iQ.Gamut is the new LED calibration technology from GLP. The iQ.Gamut settings let
you choose a calibrated color gamut within which the fixture operates.
● FULL (default): Color mixing is calibrated to the X5 color gamut. This setting gives
best results for applications where deep saturated colors are needed.
● Rec.2020: Color mixing is matched to the limits of the Rec.2020 gamut. This setting
gives best results for UHD TV applications and avoids color clipping.
● Rec.709: Color mixing is matched to the limits of the Rec.709 gamut. This setting
gives best results for HD TV applications and avoids color clipping.
Performance settings
You can select between three different settings for the movement speed of the
fixture’s mechanical effects (pan/tilt and zoom):
● Normal sets mechanical effects movement to give an optimum balance between
speed, quietness and smoothness. Normal is the default setting.
● Fast sets movement to maximum speed. This setting gives very fast effect movement
but can result in higher noise levels.
● Smooth optimizes the smoothness of the mechanical effects and gives lowest-noise
performance. This setting gives extremely low noise and smooth performance, but
effect movement will be slower than in Normal mode.
Fan modes
Five cooling fan modes let you give priority to lowest fan noise or most powerful
cooling:
● Regulated mode gives priority to light output and only operates fans as necessary. If
the fixture is blacked out, fans run at minimum speed. When light output intensity is
increased, temperature regulation increases fan speed to the level necessary to
keep the fixture at optimum temperature.
If light output is set to maximum intensity but the fans can keep the fixture at
optimum temperature, there is no regulation of light intensity. If the fixture begins to
exceed optimum temperature and the fans are running at maximum speed, light
intensity is limited until optimum temperature can be maintained.
● High mode sets the fixture to give maximum light output and suits operation in high
ambient temperatures. Fans are set to constant operation at high speed. Light
output intensity is limited smoothly if it becomes necessary in order to keep fixture
temperature at optimum level.
You can also use High mode to cool down a fixture quickly after a period of
operation or to help remove dust from cooling fans.
● Medium mode sets fans to constant operation at medium speed. Light output
intensity is reduced to a level where it will normally remain constant at ambient
temperatures of up to 45° C (113° F). Intensity is smoothly limited further if it
becomes necessary in order to keep fixture temperature at optimum level.
To Next Page
Loading...
