GLP impression X5 - Control menus; Menu Navigation and Options

www.glp.de
30 impresssion X5 User Manual
6. Control menus
Quick menu
The control panel’s Quick Menu gives you quick access to the most frequently used
commands. To open the Quick Menu, press the left-hand control button marked
when the display is showing the default information screen.
The Quick Menu contains the following items:
Menus
Notes
Reset All
Resets the entire fixture (takes a
few seconds).
Live Diagnostic
Calls up overview of all main
fixture information, signal quality
and settings.
iQ.Service Connect
>>>Connect<<<
Enables connectivity to the GLP
iQ.Service App for 5 minutes.
Load User Settings
User Setting 1
>>>Confirm<<<
Loads custom user settings
User Setting 2
>>>Confirm<<<
User Setting 3
>>>Confirm<<<
Setting
Defaults
>>>Confirm<<<
Returns fixture to default settings
(not including DMX address,
protocol type, Ethernet / CRMX
configuration, user offsets, user
presets and counters).
Load Factory Defaults (!)
Displays Message: Fixture may
lose connection to controller
>>>Confirm<<<
Restores all factory default
settings (including DMX address,
protocol type, Ethernet / CRMX
configuration, user offsets and
user presets).
Important! The fixture may lose
contact with the controller!