www.glp.de
28 impresssion X5 User Manual
Trigger iQ.Service Connect
Pressing and holding ENTER for 6 seconds enables connectivity to the GLP iQ.Connect
Service App for 5 minutes.
Error codes
If the fixture detects an error, it displays an error code in the display. Error codes are
‘sticky’ – they will continue to be shown in the display until the next power cycle or
reset.
See ‘Error codes’ on page 36 for a key to the codes that the impression X5 can display.
Loss of DMX signal
The display flashes if the DMX signal is lost.
To Next Page
Loading...
