GLP impression X5 - Page 33

German Light Products®
Rev. 20220720-01 33
No Signal
No Signal Mode
Blackout
Fixture blacks out if no
DMX signal received
Hold
Fixture continues to
display current effect if no
DMX signal received
Scene
Plays the stored captured
scene (see next menu
item) if no DMX signal
received
Capture DMX Values
>>>Confirm<<<
Captures current scene
and stores it for use in No
Signal Mode → Scene
Pan Invert
OFF
Reverse direction of pan
movement
ON
Tilt Invert
OFF
Reverse direction of tilt
movement
ON
Position
feedback
OFF
Enable/disable pan/tilt
position correction
ON
Pan Disable
OFF
Disables pan motor
ON
Tilt Disable
OFF
Disables tilt motor
ON
Pan range
Normal
Pan range limited to 540°
Extended
Pan range = maximum
Accessory
None
Tilt angle not limited
Egg crate
Tilt angle limited to allow
for egg crate
Snoot
Tilt angle further limited to
allow for installation of
snoot or similar accessory
Display Mode
Auto
Display dims after a short
period of inactivity if no
errors and valid DMX
signal
On
Display constantly on
Off
Display dims even if there
are errors / no DMX signal
Display
Orientation
Auto
Display automatically
inverts to match
installation position
Normal
Display normal (for use
when fixture is standing)
Upside-down
Display inverted (for use
when fixture is flown head-
down)
Hibernation
ON
Fixture enters energy
saving mode, all
electronics except DMX
receiver are disabled.
Cycling power off and on
exits hibernation.