Page 7 of 52
Introduction
1. INTRODUCTION
This Operator’s Manual has been designed to provide you, the owner, user or operator, with the instructions and
operating procedures essential to properly and safely operate your GMG Aerial Work Platform for positioning
personnel, along with their necessary tools and materials, to overhead work locations.
The Operator’s Manual must be read and understood prior to operating
your GMG Aerial Work Platform. The user/operator should not accept
operating responsibility until he/she has read and understands the
operator’s manual as well as having operated the GMG Aerial Work
Platform under supervision of unauthorized, trained and qualified
operator.
It is essential that the operator of the aerial work platform is not alone on
the workplace during operation.
Modifications of this machine from the original design and specifications
without written permission from GMG are strictly forbidden. A modification
may compromise the safety of the machine, subjecting operator(s) to
serious injury or death.
Global Machinery Group
Your GMG Aerial Work Platform has been designed, built, and tested to provide safe,
dependable service. Only authorized, trained and qualified personnel shall be allowed
to operate or service the machine.
GMG, as manufacturer, has no direct control over machine application and operation.
Proper safety practices are the responsibility of the owner, user and operator.
If there is a question on application and/or operation contact:
Global Machinery Group, Inc.
USA Office:
Global Machinery Group, Inc.
3428 Bullock Lane
San Luis Obispo, CA 93401
USA
Phone: +1.805.303.2066
www.goGMG.com
Eruope Office:
GMG Europe
Leemidden 21
2678ME DE LIER
The NETHERLANDS
Phone: + 31 174 52 59 90
To Next Page
Loading...
