Page 29 of 52
6. OPERATING INSTRUCTIONS
6.1 EMERGENCY STOP
• Push in the EMERGENCY STOP to the OFF position at the lower controls or the platform controls to
stop all machine functions.
• If any function operates when either EMERGENCY STOP is pushed in, repair the EMERGENCY
STOP function before using the machine.
The Emergency Lowering System is used to lower the platform in case of power failure.
• Pull the Emergency Lowering Handle to lower the platform.
6.2 EMERGENCY LOWERING
If the control system fails while the platform is elevated, use the emergency
lowering procedure to safely lower the platform.
Do not climb down the scissor assembly or exit the platform.
Check the area above and around the machine for obstructions and electrical
power lines before operating the machine.
Operating Instructions
To Next Page
Loading...
