Page 37 of 52
8. BATTERY CHARGING
IMPORTANT— Be sure to disconnect the charger from the outlet before attempting to operate
the unit. The charger will indicate the status of the charge cycle.
The charger surface can get hot while operating. Contact with the skin or
surrounding materials should be avoided.
To reduce the risk of an electric shock, connect only to a properly grounded
single-phase (3 wire) outlet.
Do not use an external charger or booster battery.
Charge the battery in a well-ventilated area.
Use proper AC input voltage for charging as indicated on the machine.
Use only GMG authorized batteries and chargers.
Battery Charging
,DE-6433 ,DE-2362DE-0391
4046-ED, 4646-ED
Battery Charge
Location
Battery Charge
Location
To Next Page
Loading...
