Need help?Do you have a question about the GMG 3394-RT and is the answer not in the manual?
Provides an overview of the operator's manual for GMG Aerial Work Platforms.
Outlines critical safety rules, warnings, and symbols for operating the machine.
Explains the meaning of GMG's safety symbols and color coding for hazard recognition.
Details compliance with safety rules and proper use of personal fall protection equipment.
Warns about the danger of electrocution and specifies minimum safe approach distances to conductors.
Covers risks associated with overloading, slopes, uneven surfaces, and windy conditions.
Advises against climbing on rails, exiting the platform when elevated, or attaching restraints to adjacent structures.
Highlights the need to check for obstructions, overhead hazards, and crushing risks during operation.
Addresses explosion, fire, bodily injury, weld line, and battery-related safety concerns.
Illustrates the overall placement of major parts like the platform, controls, and engine.
Shows the specific locations of components within the Fuel/Fluid and Control modules.
Details the layout and function of the controls located on the operator's platform.
Shows and describes the controls available at the base of the machine.
Outlines the procedures for inspecting the jobsite before operating the machine.
Lists potential hazards to check for in the operating environment.
Explains daily checks and functional tests required before operating the machine.
Provides step-by-step guidance for safe machine operation.
Covers operation and testing of base and platform controls, including driving, lifting, and steering.
Details platform elevation, lowering, steering, drive speed, and braking.
Explains how to use the emergency lowering switch in case of power or valve failure.
Details how to extend and retract the platform deck extension.
Provides step-by-step instructions for folding down the platform railings.
Outlines requirements for machine inspection and maintenance, including pre-start and scheduled checks.
Lists checks to be performed before each work shift to ensure machine readiness.
Details monthly, quarterly, annual, and lubrication schedules for maintenance.
Covers general maintenance, routine tasks, and warnings for safe service.
Explains the information found on the machine's serial plate.
Provides guidance for identifying and resolving machine malfunctions.
Details the process for safely loading the machine onto a transport vehicle.
Explains how to safely drive or winch the machine onto or off a transport vehicle.
Provides instructions for properly lifting and securing the machine for transport.
General| Brand | GMG |
|---|---|
| Model | 3394-RT |
| Category | Scissor Lifts |
| Language | English |
To Next Page
