Section
3394RT---6094RT Scissor Lifts - Operator’s Manual Page 12
ENTERESC
Control Description
1 LED Display Onboard Diagnostics and Clock display
2 Circuit Breaker
Trips when there is excessive electrical load
Push to reset
3 Hour Meter Indicates total elapsed time of machine operation
4 Emergency Down Switch Push DOWN and hold to LOWER the platform
5 Lower / Raise Switch
Push UP and hold to RAISE platform
Push DOWN and hold to LOWER the platform
6 Engine Start Switch
Push UP and hold to start engine
Push DOWN and hold to preheat engine
7 High / Low Engine RPM Switch
Push to the LEFT for engine low RPM
Push to the RIGHT for engine high RPM
8 Platform / Base Selector Switch
Turn the Key to the LEFT to operate from the Platform
Turn the Key to the RIGHT to operate from the Base
9 Emergency Stop Switch
Push IN to stop all functions
Pull OUT to reset
1
2
8
9
3
4 5 6 7
Lower Controls
4 - Component Locations
To Next Page
Loading...
