Section
3394RT---6094RT Scissor Lifts - Operator’s Manual Page 14
Function Tests
Operating Instructions
DO NOT operate this machine until you have read and understood this manual, have performed the
Workplace Inspection, Prestart Inspection, Routine Maintenance, and have completed all the test
operations detailed in the Operating Instructions section.
This section provides instructions and tests for each function of machine operation. Follow all safety rules
and instructions. The operator must conduct inspections and a Functions Test of the machine before each
work shift to check that all machine systems are working properly.
Test the machine on a firm level surface with no debris, drop-offs, potholes or overhead obstructions.
Perform each step outlined in this section.
This machine shall only be operated by trained and authorized personnel. If multiple operators use this
machine, all must be trained, qualified and authorized to use it. New operators must perform a Pre-Start
Inspection and Functions. Test prior to operating the machine.
Operators must comply with all employer and job site rules and governmental regulations regarding the use
of personal protective equipment.
DO NOT use a machine that is malfunctioning. If any function does not perform as described, tag the
machine and remove for repair by a qualified service technician.
DO NOT operate this machine until you have read and understood this manual, have performed
the Workplace Inspection, Prestart Inspection and Routine Maintenance, and Functions Test, have
inspected the jobsite for hazards, and have learned the operating procedures for this machine.
The operator must conduct a Functions Test of the machine before each work shift to check that all
machine systems are working properly.
Test the machine on a firm level surface with no debris, drop-offs, potholes or overhead obstructions.
Perform each step outlined in this section.
DO NOT use a machine that is malfunctioning. If any function does not perform as described, tag the
machine and remove for repair by a qualified service technician.
6 - Function Tests and Operating Instructions
To Next Page
Loading...
