Section
3394RT---6094RT Scissor Lifts - Operator’s Manual Page 32
10 - Machine Inspections and Maintenance
Lubrication
Operator may perform routine maintenance only. Lubrication listed as Scheduled Maintenance must be per-
formed by a qualified service technician.
Fuel / Fluid Module
NO. ITEM SPECIFICATION FREQUENCY
1
HYDRAULIC
RESERVOIR
Mobile Fluid 424
Do not substitute with lower grade
fluids as pump damage may result.
Fill to the middle of the sight gauge with
platform in the stowed position
Routine Maintenance
Check Daily
Scheduled Maintenance
Change yearly or every 1000 hours,
whichever occurs first
2
HYDRAULIC
FILTER
Filter Element
(located inside Hydraulic Reservoir)
Scheduled Maintenance
Normal Conditions
Change every six months or 500 hours,
whichever occurs first
Severe Conditions
Change every three months or 300 hours,
whichever occurs first
3 HUBS
SAE 90 Multipurpose Hypoid Gear Oil API
Service Classification GL5
Scheduled Maintenance
Check every three months or 250 hours,
whichever occurs first
Change yearly or every 1000 hours,
whichever occurs first
Fuel Sight Guages
Add Oil Here
LEVEL
Fill to Here
Hydraulic Fluid
Sight Guage
1
2
3
To Next Page
Loading...
