Section
3394RT---6094RT Scissor Lifts - Operator’s Manual Page 31
10 - Machine Inspections and Maintenance
Routine Maintenance
Important - The operator may perform routine maintenance only. Scheduled maintenance must be per-
formed by qualified service technicians.
Pre-Start Inspection
• Perform routine maintenance as identified in the Pre-Start Inspection Checklist.
Scheduled Maintenance
Maintenance performed monthly, quarterly, annually and bi-annually must be performed by a qualified
service technicians trained and authorized to perform maintenance on this machine, and must be done in ac-
cordance with the procedures outlined in the service manual. Scheduled maintenance inspection checklists
are included in this manual for use by qualified service technicians.
Machines that have been out of service for more than three months must receive the quarterly inspection
before returning to service.
Maintenance Lock
Never perform service on the machine with the platform elevated without first
blocking the scissor assembly using the maintenance lock.
Setting The Maintenance Lock
1. Elevate platform approximately 16 feet (5 m) and rotate maintenance lock to
Blocked position
2. Lower platform until scissor assembly comes to rest on the maintenance lock.
3. Scissor assembly is blocked.
To Next Page
Loading...
