GMG 3394-RT - Driving or Winching onto or off of a Transport Vehicle

Section
3394RT---6094RT Scissor Lifts - Operator’s Manual Page 36
13 - Transport and LIfting Instructions
GMG does not recommend unassisted loading or unloading.
Always attach the machine to a winch when loading or unloading from a truck
or trailer by driving.
Read and understand all safety, control, and operating information found on
the machine and in this manual before operating the machine.
Process
• Attach the machine to a winch.
• Remove all machine tie downs. Remove wheel chocks.
Driving
• Turn the Base Key Switch to PLATFORM. Check that the Emergency Stop Switch is reset by pulling it out.
• Enter the platform and reset the Platform Emergency Stop Switch.
• Test platform control functions.
• Carefully drive the machine off the transport vehicle with the winch attached.
Note
• The brakes are automatically released for driving and will automatically apply when the machine stops
driving.
Winching
• Disengage brakes (see Disengage Brakes before Towing or Winching on page 35).
• Carefully operate the winch to lower the machine down the ramp.
• Chock the wheels and engage the brakes.
Winch
Driving or Winching onto or off of a Transport Vehicle