Page 9 of 52
Safety
2. SAFETY
DO NOT operate this machine until you have read and understood this manual, have performed the Workplace
Inspection, Pre-Start Inspection and Routine Maintenance, and have completed all the test operations detailed in the
Operating Instructions section.
Failure to read, understand and follow all safety rules, warnings, and instructions could result in serious injury or death.
For your safety and the safety of those around you, you must operate your machine as instructed in this manual.
GMG designs aerial work platforms to safely and reliably position personnel, along with their necessary tools and
materials, at overhead work locations. The owner/user/operator of the machine should not accept responsibility for the
operation of the machine unless properly trained.
2.1 SAFETY ALERT SYMBOLS
GMG manuals use symbols and colours to help you recognize important safety, operation and maintenance
information:
RED - Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
ORANGE - Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
YELLOW with alert symbol – Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
To Next Page
Loading...
