GMI GT series Users Handbooks

12
CONFIGURATION & FIELD CALIBRATION
1.5 SERVICE DUE DATE
The Service due date can be set by the workshop and is
set to two (2) years by default from last service date. The
date can be set over a period of 1 to 36 months in 1 month
steps.
Note : By default, the service due date will not
normally be displayed at start up, but if
display option is selected, it will be shown
at 90 days prior to the preset date, as
shown in Fig. 1.16.
The SERVICE DUE feature has five (5) configurable
options:
1. Service Due Date message is not displayed
(Default).
2. Service Due Date and overdue date messages
are displayed, as shown in Fig. 1.16.
Fig. 1.16 Service Due Date
The screen, shown in Fig. 1.17, is displayed when
the Service date has expired. i.e. overdue.

GMI GT series Specifications

General

Brand	GMI
Model	GT series
Category	Measuring Instruments
Language	English