Need help?Do you have a question about the GMI GT series and is the answer not in the manual?
General| Brand | GMI |
|---|---|
| Model | GT series |
| Category | Measuring Instruments |
| Language | English |
Lists the detection ranges available for GT series instruments, including Methane, Oxygen, CO, and H2S.
For investigating odour or leak complaints and pinpointing leaks.
Used for confined space pre-entry testing and personal monitoring.
Used to locate underground leaks, can be timed or non-timed.
For making CO Direct, Differential CO, or Air Free CO readings.
Used in gas and air purging applications.
Used to find small fitting leaks with fast detection rates.
Used as a manometer to measure appliance and regulator pressure.
Allows user to set up gases, apply gases, and log readings.
Steps to power on the instrument in fresh air, including warm-up cycle.
Displays the instrument's battery capacity level indicator.
Information regarding the instrument's calibration due date and overdue status.
Details on when the instrument is due for service and overdue status.
Lists the features available for Leak Test mode, such as alarms and backlight.
Explains the various display screens and indications during leak tests.
Summary of button functions and their actions in Leak Test mode.
Outlines the features specific to Confined Space Mode, like alarms and datalogging.
Describes the button functions and their actions within CSM mode.
Details indications for various faults like low battery, zero fault, and sensor faults.
Guide on how to replace dust, hydrophobic, chemical, and cotton filters.
Instructions for replacing the instrument's alkaline or rechargeable batteries.
User's responsibility for maintaining calibration validity and recommended checks.
Information on available training courses for GMI products and contact details.
General safety guidelines and warnings for instrument use and battery handling.
To Next Page
