2-1
GENERAL FEATURES
• An integral pump draws the required sample over all of the
sensors
• The pump flow is monitored by means of a pressure
transducer
• Datalogging is available for some applications
• A ‘Bleep’ sounds for each button press
• A green LED indicates ‘Power ON’
2
To simplify use in its many
applications, the instrument
utilises a menu system similar to
a (cell) mobile phone, as shown
in Fig 2.1.
The bottom line of the LCD can also be used to indicate press and
hold button functions available.
By simple selection of the application you need, the appropriate
gas(es) are shown on the display and only the necessary button
functions and alarms are activated.
Note: Your company may have decided to have its instruments
congured only for certain of the aforementioned applications.
Fig. 2.1 Mode Menu
To Next Page
Loading...
