GMI GT series - Bump Test Button Operation

11-5
BUMP TEST MODEUSER HANDBOOK
To select highlighted option:
• Press and hold NEXT .
The screen, shown opposite,
displays the previously stored
bump test data:
To return to CalGas Display:
• Press and hold OK .
11.4 BUMP TEST BUTTON OPERATION
A summary of the button operation is detailed in Table 11.1.
LH
(INVERT)
RH
(PUMP)
CENTRE
(RANGE)
ACTION
PRESS
INVERT
DISPLAY
NEXT OK
EXIT
VIEW PREVIOUS
32 BUMP TESTS
PRESS
and
HOLD
Table 11.1 Button Operation in Bump Test Mode
Fig. 11-7 Stored Bump Test Data