GMI GT series - Enter Alarms Menu

38
CONFIGURATION & FIELD CALIBRATION
An example of this display is shown in Fig. 3.5:
Fig. 3.5 Configuration & Field Calibration Menu
3.2 ENTER ALARMS MENU
To enter ALARMS menu:
 Use the the UP or DOWN buttons to scroll
through the options until ALARMS is highlighted in
the display as shown in Fig. 3.6:
Fig. 3.6 Alarms Highlighted
 When ALARMS is highlighted, press OK .
The following display, Fig. 3.7, will request the
alarms code to be entered.