24
CONFIGURATION & FIELD CALIBRATION
An example of this display is shown in Fig. 2.5:
Fig. 2.5 Configuration & Field Calibration Menu
2.2 ENTER CALIBRATION MENU
To enter CALIBRATE menu:
Use the UP and DOWN buttons to scroll
through the options until CALIBRATE is highlighted
in the display as shown in Fig. 2.6.
Fig. 2.6 Calibrate Highlighted
When CALIBRATE is highlighted, press OK .
The following display, Fig. 2.7, will request the cali-
bration code to be entered.
To Next Page
Loading...
