34
CONFIGURATION & FIELD CALIBRATION
To exit the calibration menu and return to the configuration
& field calibration menu:
Press and hold OK .
If the Abandon option was selected, the configuration &
field calibration menu is displayed, as shown:
Fig. 2.21 Configuration & Field Calibration Menu
Note: The Calibration mode, or sequence, may be
abandoned at any time by pressing and holding
both buttons together for 3 seconds. The display
will count down from 3 seconds to OFF.
If you wish to now enter a configuration function or return
to operational (normal) mode, use the UP
or DOWN
buttons to highlight your option.
To select highlighted option:
Press and hold OK .
To Next Page
Loading...
Need help?
General
