Gocycle G2 - Page 36

Gocycle
®
Owner’s Manual for G2R, August 2015
© Karbon Kinetics Limited. All Rights Reserved. 33
BEST PRACTISE! With the battery fully
charged and the charger disconnected, turn
the battery off by placing it into Sleep
Mode. See section 5.3.4 Returning the
Battery to Sleep Mode for more
information.
Ensure that the rubber charging port cover
is in place before riding.
5.3.2 Battery Operation Mode (Wakes the Battery for Use)
The battery must be in Operation Mode before you can use your Gocycle. If the battery is not in
Operation Mode, the Gocycle will not function, the gears will not shift and the motor will not work.
To wake the battery for use:
Press the button until the LEDs begin to
flash