Gocycle
®
Owner’s Manual for G2, August 2015
© Karbon Kinetics Limited. All Rights Reserved. 83
Now rotate the pedal cranks in
a backwards direction, as
shown.
When movement of the pedal
cranks is detected, two LEDs
will light on the left hand side
of the dashboard display.
Note: When functioning
correctly, in a full rotation of
the pedal cranks, the two LEDs
will flash eight times.
Exit by pressing and holding
buttons A and B—the riding
mode will flash to confirm exit.
Pedal and Wheel Sensor Physical Check
Checks the operation of the pedal and wheel
sensors
To Next Page
Loading...
