Gocycle
®
Owner’s Manual for G3, March 2016
© Karbon Kinetics Limited. All Rights Reserved. 39
5.3.2 Battery Operation Mode (Wakes the Battery for Use)
The battery must be in Operation Mode before you can use your Gocycle. If the battery is not in
Operation Mode, the Gocycle will not function, the gears will not shift and the motor will not work.
To wake the battery for use:
Press the button until the LEDs begin to
flash
The two left LEDs (1,2) will begin to flash
while the battery is waking up
The LEDs on the dashboard will light up to
confirm that the Gocycle is on and ready to
use
5.3.3 Checking Your Battery Charge Level
The battery charge level will show on the dashboard display during riding. If the Gocycle is
stationary (including when on charge) for more than one minute (60 seconds), the display screen
saver will be shown. Press either button to view the charge state.
To Next Page
Loading...
