EasyManua.ls Logo

Gocycle G3 - Page 52

Gocycle G3
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Gocycle
®
Owner’s Manual for G3, March 2016
© Karbon Kinetics Limited. All Rights Reserved. 48
In this mode, within the motor operating speed and whilst the rider is providing pedal input, the
motor will start automatically and will continue to operate until the maximum speed is reached.
For maximum motor assistance, rotate “wrist down” selector A.
Above the maximum motor speed, the motor will stop. There is no need to rotate “wrist down”
selector A. When the pedals cease to rotate or with reduced pedal input, the motor will stop.
WARNING! The motor will continue to operate while the rider exerts pedal effort and is travelling
within the motor operating speed. To stop the motor, cease pedalling, or reduce pedal effort.
Mode
Eco
LED Mode Display
2
Left-hand Selector A
Need not be rotated “wrist down”
Pedals
Control motor assistance levelmust be turning
Motor Start
Medium pedal effort
Maximum Motor Assistance
High pedal effort, or press and hold red power button
Top Speed (Motor Cut-Out Speed)
Up to 15.5mph (25km/h)
6.3.2.3 On Demand Mode
In On Demand mode, the rider can simply choose whether or not to have motor assistance. Select this
mode if you wish to ride the Gocycle without motor assistanceor assistance only when required.
In On Demand mode, within the motor operating speed and whilst pedalling, simply rotate “wrist
down” selector A to start and maintain motor assistance. The motor will continue to operate until the
maximum speed is reached, or until the pedals cease to turn, or until selector A is released. When the
pedals cease to rotate or selector A is released, the motor will stop.
Note: Relying heavily on the motor assistance will dramatically reduce the range of your battery and
increase the wear on your motor drive components. See 6.6 Maximising Your Gocycle’s Motor
Performance and Reliability for more information as to how to get the best out of your Gocycle.
WARNING! The motor will continue to operate while the red button is pressed and the pedals are
rotating. To stop the motor, cease pedalling or release the red power button.
Mode
On Demand
LED Mode Display
3
Left-hand Selector A
Rotate “wrist down” and hold for motor to
operate
Pedals
Must be turning for motor to operate
Top Speed (Motor Cut-out Speed)
Up to 15.5mph (25km/h)

Table of Contents

Related product manuals