Gocycle G3 - Page 90

Gocycle
®
Owner’s Manual for G3, March 2016
© Karbon Kinetics Limited. All Rights Reserved. 86
WARNING! Check the hub gear bearing adjustment every 500 miles (800 km) or 6 months. Regular
checks will ensure best possible performance for your Gocycle.
Failure to inspect the hub gear bearing adjustment may have serious consequences and could result
in serious bodily injury or even death.
To check if adjustment is
required, using gentle
pressure, move the wheel
at the rim side to side.
Some flex in the wheel is normal, but if you feel that the wheel is loose, you will need to adjust the
bearing cone as shown below:
Remove the hub cap
Adjusting the rear hub gear
bearing cups