Godox V100 C - Firmware Upgrade; Compatible Camera Models

64
Firmware Upgrade
This product supports rmware upgrade through the USB-C port, please
use USB-C cable (sold separately).
As the rmware upgrade needs the support of Godox G3 V1.1 software,
please download and install the "Godox G3 V1.1 rmware upgrade
software" before upgrading. Then, choose the related rmware le.
Please refer to the latest electronic version of the instruction manual.
The download website of rmware upgrade is:
https://www.godox.com/rmware-flash/
●
●
●
●
Compatible Camera Models
V100 C unit can be used on the following Canon EOS series camera models:
V100 S unit can be used on the following Sony series camera models:
1DX, 5D Mark II, 6D, 7D, 60D, 50D, 40D, 30D, 650D, 600D, 550D, 500D, 450D,
400D Digital, 1100D, 1000D, 5D Mark IV, 7D Mark II, 760D, 750D, 70D, 80D,
800D, 77D, M5, M3, M50, EOS R, 1500D, 3000D, RP
α77II, α99, α77, DSC-RX10, α6000, α7R, α6400, α7RII, α7RIII, α7M3, α9,
α7RIV, α7R5, α7MIV, ZV-E10, α58, ILCE6000L, α7R3, α350, α9III
1. This table only lists the tested camera models, not all cameras. For the
compatibility of other camera models, a self-test is recommended.
2. Rights to modify this table are retained.