28 29
months.
Removable batteries should be stored separately. The storage
temperature should be between 0°C and 40°C.
Precautions for using lithium batteries:
• Do not disassemble, crush, or puncture the battery;
• This battery is not waterproof, keep it dry and avoid immersing it in
water or fog.
• Avoid short-circuiting the battery contacts;
• Do not expose the battery to or put it into re;
• Do not expose the battery to temperatures above 60°C;
• Keep out of reach of children;
• Protect the battery from excessive shock or vibration;
• Do not use a damaged battery;
• If the battery leaks, avoid contact with the leaking fluid;
• If the battery fluid comes into contact with your eyes, immediately
rinse with water for at least 15 minutes. Lift your eyelids until there are
no signs of fluid and seek medical attention promptly.
Conrm and comply with all relevant local laws and regulations when
handling any batteries.
The warranty period for this device as a whole is one year.
Consumables (such as batteries), adapters, power cords, and other
accessories are not covered by the warranty.
Unauthorized repairs will void the warranty and will incur charges.
Please check the status and power of the lithium battery upon receipt.
If there are any quality issues, please contact Godox or our authorized
dealer within the warranty period.
Failures from improper operation is not covered under warranty.
19.
20.
21.
22.
23.
24.
Foreword
Main Features
Thank you for purchasing!
This V1Pro C camera flash applies to Canon EOS series cameras and is
compatible with E-TTL II auto flash. With this E-TTL compatible flash, you will
get a simpler and better shooting experience, easily achieve a correct flash
exposure even in complex light-changing environments.
With round lens to achieve soft, even and more creative light effects.
2W LED modeling lamp with brightness adjustment from 1 to 10.
76Ws flash power output at 1/1 step in M mode, 81 steps adjustable from
1/1 to 1/256.
7.2V/2980mAh lithium battery provides 1.3s recycle time at 1/1 step.
Fully support Canon E-TTL II camera flash. Workable as transmitter or
receiver unit in a wireless flash group.
Use dot-matrix LCD panel to achieve clear and convenient operations.
With built-in 2.4GHz wireless system to support remote transmitting and
receiving.
Can be collocated with power pack PB960 to achieve quicker recycle time.
Support use with detachable sub flash SU-1 for better lling light.
Provide multiple functions, include manual flash, multi flash, HSS, Second-
Curtain Sync, FEB, FEC, etc.
Stable consistency in brightness and color temperature with good even
lighting.
Support rmware upgrade to better compatible with Canon cameras.
Note: Power pack PB960 is sold separately.
Contents
Foreword
Main Features
Name of Parts
Body
Control Panel
Detachable Sub Flash SU-1
LCD Panel
What's Inside
Separately Sold Accessories
Battery
Battery Level Indication
Power Management
Modeling Lamp
Mounting/Detaching the Camera Flash
Installing/Detaching SU-1
Using SU-1
Flash Mode — E-TTL Auto Flash
FEC (Flash Exposure Compensation)
FEB (Flash Exposure Bracketing)
FEL (Flash Exposure Lock)
High-Speed Sync
Second-Curtain Sync
Flash Mode — M: Manual Flash
Flash Mode — Multi: Stroboscopic Flash
Wireless Flash Shooting: 2.4G Wireless Transmission
Wireless Settings
Wireless Channel Settings
ID Settings
Scan the Spare Channel
Transmitter Unit's (Flash) ON/OFF
ETTL: Fully Automatic Wireless Flash Shooting
M: Wireless Flash Shooting with Manual Flash
Multi: Wireless Flash Shooting with Manual Flash
TTL/M Mode Switch Function
Locking Function
The Reason & Solution of Not Triggering in Godox
2.4G Wireless
Other Applications
Sync Triggering
Modeling Flash
Auto Focus Assist Beam
Bounce Flash
ZOOM: Setting the Flash Coverage
Low Battery Warning
C.Fn: Setting Custom Functions
Control with the Camera's Menu
Protection Function
Technical Data
Troubleshooting
Firmware Upgrade
Compatible Camera Models
Maintenance
28
28
30
32
32
33
33
33
33
33
34
34
35
37
38
39
46
46
48
48
49
50
51
52
52
52
To Next Page
Loading...
