golmar G2+ - Page 33

33
SPECIAL CODES
SOU S5110/ART 7 VIDE ENTL O DOOR RY SYSTEM KIT
Visible Not Visible Factory setting
Activate/deactivate the ('power on indicator' notification icon) and (LEDs of the hidden buttons above the
raised dots / for the visually impaired) on a monitor
.
Door panel 1 0111 0110 0111
Automatic door opening upon reception of a call on a monitor (only setting on master monitor).
.
Door panel 4 0151 0150 0150
Door panel 3 0131 0130 0130
Camera 1 0141 0140 0140
Activation times of the outputs (Door panel ).2 (Only setting on master monitor).
Lock release From 200 (0.5s) to 219 (10s) 20 (3s)1 1 1 5
.
Video sources available on a monitor .(configure only on master monitor)
Activated Deactivated Factory setting
Setting the remote activation button (Door panel ).1 (Only setting on master monitor).
Camera 3 0171 0170 0170
Door panel 2 0121 0120 0120
Important: SOUL/1, SOUL/2 and SOUL/4 door panels with versión V04 or later.
0441 0440 0440
Do not display Display Factory setting
Activation times of the outputs (Door panel ).1 (Only setting on master monitor).
.
0471 0470 0471 (activated)
0481 0480 0480 (display image)
Do not display the image on monitor when receiving a call from the door panel and the monitor is in "do not
disturb" mode.
Camera 4 0191 0190 0190
Camera 2 0181 0180 0180
Factory setting
Lock release From 200 (0.5s) to 219 (10s) 20 (3s)0 0 0 5
Relay From 300 (0.5s) to 319 (10s) 30 (3s)0 0 0 5
Factory setting
.
Delay From 400 (0.5s) to 419 (10s) 403 ( s)0 0 0 2
Output 430 (lock release) or 431 (relay) 430 ( )0 0 0 lock release
.
Factory setting
Relay From 300 (0.5s) to 319 (10s) 30 (3s)1 1 1 5
Activate Deactivate
Factory setting
Setting the remote activation button (Door panel ).2 (Only setting on master monitor).
Factory setting
Delay From 400 (0.5s) to 419 (10s) 403 ( s)1 1 1 2
Output 430 (lock release) or 431 (relay) 430 ( )1 1 1 lock release
Continued from previous page.
*
( )
*
( )
*
( )
*
( )
*
( )
Continued overleaf