Goodwe ETC Series User Manual

23
Q: Is there a quick way to make the system work?
Q:
Q:
Can I use other brand Meter to take over Smart Meter in ETC system or change some
settings on Smart Meter?
Will the warranty of the inverter still be valid if for some special conditions we cannot
100% follow the installation or operation instructions of the user manual?
Other Questions
Manufacturer will keep the right to explain all the contents in this user manual.
No, because the communication protocol is inset between inverter and Smart Meter, other brand
Meter cannot communicate. Also any manual setting change could cause Meter communication
failure.
The shortest way, please refer to "ETC Quick Installation Instructions".
A:
A:
Normally we can still provide technical support to problems caused b disobeying the instruction
on the user manual, but we cannot guarantee a replacement or returns. So if there is any special
conditions where you cannot 100% follow the instructions, please contact after-sales.
The ETC series inverters are transported, used and operated under environmental and electrical
conditions. Manufacturer has the right not to provide after-sales services or assistance under
following conditions:
• Inverter is damaged during transfer.
• Inverter's warranty has expired and extended warranty is not bought.
• Inverter is installed, re󽗉tted or operated in improper ways without authorisation from
manufacturer.
• Inverter is installed or used under improper environment or technical condition mentioned in
this user manual, without authorisation from manufacturer.
• Installation or con󽗉guration of the inverter does not follow requirements mentioned in this user
manual.
• The inverter is installed or operated against the requirements or warnings that are mentioned in
this user manual.
• Inverter is broken or damaged by any force majeure like lightening, earthquake, 󽗉re hazard,
storm and volcanic eruption etc.
• Inverter is disassembled, changed or updated on software or hardware without authorisation
from manufacturer.
• Inverter is installed, used or operated against any related items in international or local policies
or regulations.
• Any non-compatible batteries, loads or other devices connected to ETC system.
A:
Disclaimer
Note:
Maintenance
The inverter requires periodical maintenance, details as shown below:
• Make sure inverter is totally isolated from all DC and AC power for at least 5 mins before
maintenance.
• Torque: Please use torque wrench to tighten AC and DC wiring connection once a year.
• Clean: Clean the dust of the fan inlet once a year
• DC breaker: Check DC breaker regularly, active the DC breaker 10 times in a row once a year.

Goodwe ETC Series Specifications

General

Brand	Goodwe
Model	ETC Series
Category	Inverter
Language	English