Goodwe Lynx Home F Plus+ Series - Page 31

27
06 Electrical Connection
User Manual V1.9-2023-04-30
NOTICE
• Manual hydraulic press plier is recommended when using power cables with
14mm
2
≤S≤16mm
2
in cross sectional area.
• The drawing force of the cable after crimping should be at least 1200N when the cross-
sectional area range of the cable is 14mm
2
≤S≤16mm
2
.
• The drawing force of the cable after crimping should be at least 500N when the cross-
sectional area range of the cable is 5mm
2
≤S≤6mm
2
.
Connecting the power cable (Type 2)
Only for Lynx home F Plus+ series.